logo
상품
제품 세부 정보
> 상품 >
SAH088 Differential Gear Set with HRC 58-62 Hardness Precision Hypoid Design for Isuzu Trucks

SAH088 Differential Gear Set with HRC 58-62 Hardness Precision Hypoid Design for Isuzu Trucks

MOQ: 10개
가격: negotiable
표준 포장: 중립 패키지 또는 고객의 요청으로
배송 기간: 5-8 근무일
결제수단: T/T, 서부 동맹
공급 능력: 10000 PC/월
상세 정보
원래 장소
중국
브랜드 이름
YIMI
인증
ISO/TS16949
모델 번호
이수주 트럭
부품 번호:
SAH088
기어 유형:
하이포이드(나선형 베벨)
표면 경도:
HRC 58-62
재료:
고합금 단조강, 표면 경화 처리
백래시 범위:
0.15-0.25mm
치아 접촉:
매치 랩
설치 유형:
직접 OEM 교체
무게:
기준
강조하다:

Isuzu truck differential gear set

,

HRC 58-62 hardened differential gear

,

precision hypoid gear set for Isuzu

제품 설명
Differential Gear Set SAH088 For Isuzu Truck Ring And Pinion
Product Overview

The Differential Gear Set (Part Number: SAH088) is a premium-quality, direct replacement drivetrain component set designed for Isuzu trucks. This ring and pinion set consists of a drive pinion and ring gear that transfers engine torque from the driveshaft to the rear axles at reduced speed with multiplied torque.

Part Number SAH088 Product Name Differential Gear Set / Ring and Pinion Set
Car Model ISUZU trucks Engine Model -
Condition 100% Brand New Size Standard
Material High-strength aluminum alloy & precision bearings Cooling Type Engine coolant circulation
Warranty 6 Months Origin China Mainland
Differential Gear Set SAH088 for Isuzu Truck
Features & Advantages
  • OE Quality: Manufactured to Isuzu dimensional and metallurgical specifications
  • Precision Hypoid Design: Quiet operation and high torque capacity
  • Case-Hardened: HRC 58-62 surface hardness for exceptional wear resistance
  • Match-Lapped: Optimized tooth contact pattern for minimal noise
  • Restores Differential Performance: Eliminates howling, whining, and clunking
  • Direct Replacement: Matches OE dimensions and gear ratio
  • Cost-Effective: Affordable alternative to genuine OEM sets
Vehicle Compatibility

This differential gear set is designed for various Isuzu truck models including:

  • Isuzu NPR: NPR59, NPR66, NPR70, NPR71, NPR75, etc.
  • Isuzu NKR: NKR55, NKR57, NKR59, etc.
  • Isuzu FSR, FVR, CXZ: select models (verify compatibility)
Installation Procedure
  1. Remove differential carrier from axle housing
  2. Remove old ring and pinion, press off old bearings
  3. Install new pinion with new bearings and crush sleeve, set preload
  4. Install new ring gear on differential case, torque bolts
  5. Install case into housing, adjust side bearing preload and backlash (0.15-0.25mm)
  6. Check tooth contact pattern with marking compound; adjust shims as needed
  7. Recheck preload, backlash, and pattern
  8. Install new pinion seal and refill with gear oil
  9. Road test and break in gears (gentle driving for first 50 km, then change oil)
Quality Control Standards
  • Material Verification: Forged steel composition and hardness tested
  • Dimensional Inspection: Pitch diameter, tooth thickness, runout verified
  • Hardness Testing: Surface hardness (HRC 58-62) confirmed
  • Tooth Profile Inspection: Involute profile and lead measured
  • Lapping Verification: Contact pattern checked
  • Noise Testing: Sample sets tested on gear roll tester
  • Magnetic Particle Inspection: 100% crack detection
  • Packaged Safely: Coated with anti-rust oil, individually wrapped, boxed with foam
Inquiry & Ordering

For pricing, availability, or bulk purchase of the Differential Gear Set SAH088, please contact our sales team for a competitive quote and expert technical support.

Main Markets: Middle East, Asia, Africa, South America, North America & Europe

Packaging: Neutral Packing Or Customized as Requested

Delivery: Fast delivery for stock items via Express Air or Sea

상품
제품 세부 정보
SAH088 Differential Gear Set with HRC 58-62 Hardness Precision Hypoid Design for Isuzu Trucks
MOQ: 10개
가격: negotiable
표준 포장: 중립 패키지 또는 고객의 요청으로
배송 기간: 5-8 근무일
결제수단: T/T, 서부 동맹
공급 능력: 10000 PC/월
상세 정보
원래 장소
중국
브랜드 이름
YIMI
인증
ISO/TS16949
모델 번호
이수주 트럭
부품 번호:
SAH088
기어 유형:
하이포이드(나선형 베벨)
표면 경도:
HRC 58-62
재료:
고합금 단조강, 표면 경화 처리
백래시 범위:
0.15-0.25mm
치아 접촉:
매치 랩
설치 유형:
직접 OEM 교체
무게:
기준
최소 주문 수량:
10개
가격:
negotiable
포장 세부 사항:
중립 패키지 또는 고객의 요청으로
배달 시간:
5-8 근무일
지불 조건:
T/T, 서부 동맹
공급 능력:
10000 PC/월
강조하다

Isuzu truck differential gear set

,

HRC 58-62 hardened differential gear

,

precision hypoid gear set for Isuzu

제품 설명
Differential Gear Set SAH088 For Isuzu Truck Ring And Pinion
Product Overview

The Differential Gear Set (Part Number: SAH088) is a premium-quality, direct replacement drivetrain component set designed for Isuzu trucks. This ring and pinion set consists of a drive pinion and ring gear that transfers engine torque from the driveshaft to the rear axles at reduced speed with multiplied torque.

Part Number SAH088 Product Name Differential Gear Set / Ring and Pinion Set
Car Model ISUZU trucks Engine Model -
Condition 100% Brand New Size Standard
Material High-strength aluminum alloy & precision bearings Cooling Type Engine coolant circulation
Warranty 6 Months Origin China Mainland
Differential Gear Set SAH088 for Isuzu Truck
Features & Advantages
  • OE Quality: Manufactured to Isuzu dimensional and metallurgical specifications
  • Precision Hypoid Design: Quiet operation and high torque capacity
  • Case-Hardened: HRC 58-62 surface hardness for exceptional wear resistance
  • Match-Lapped: Optimized tooth contact pattern for minimal noise
  • Restores Differential Performance: Eliminates howling, whining, and clunking
  • Direct Replacement: Matches OE dimensions and gear ratio
  • Cost-Effective: Affordable alternative to genuine OEM sets
Vehicle Compatibility

This differential gear set is designed for various Isuzu truck models including:

  • Isuzu NPR: NPR59, NPR66, NPR70, NPR71, NPR75, etc.
  • Isuzu NKR: NKR55, NKR57, NKR59, etc.
  • Isuzu FSR, FVR, CXZ: select models (verify compatibility)
Installation Procedure
  1. Remove differential carrier from axle housing
  2. Remove old ring and pinion, press off old bearings
  3. Install new pinion with new bearings and crush sleeve, set preload
  4. Install new ring gear on differential case, torque bolts
  5. Install case into housing, adjust side bearing preload and backlash (0.15-0.25mm)
  6. Check tooth contact pattern with marking compound; adjust shims as needed
  7. Recheck preload, backlash, and pattern
  8. Install new pinion seal and refill with gear oil
  9. Road test and break in gears (gentle driving for first 50 km, then change oil)
Quality Control Standards
  • Material Verification: Forged steel composition and hardness tested
  • Dimensional Inspection: Pitch diameter, tooth thickness, runout verified
  • Hardness Testing: Surface hardness (HRC 58-62) confirmed
  • Tooth Profile Inspection: Involute profile and lead measured
  • Lapping Verification: Contact pattern checked
  • Noise Testing: Sample sets tested on gear roll tester
  • Magnetic Particle Inspection: 100% crack detection
  • Packaged Safely: Coated with anti-rust oil, individually wrapped, boxed with foam
Inquiry & Ordering

For pricing, availability, or bulk purchase of the Differential Gear Set SAH088, please contact our sales team for a competitive quote and expert technical support.

Main Markets: Middle East, Asia, Africa, South America, North America & Europe

Packaging: Neutral Packing Or Customized as Requested

Delivery: Fast delivery for stock items via Express Air or Sea

사이트맵 |  개인정보 보호 정책 | 중국 좋은 품질 이수즈 자동차 부품 공급자. 저작권 2024-2026 Yimi (Guangzhou) Automotive Parts Co, Ltd 모든 권리는 보호됩니다.